What am i missing???!!!!

[HO4THSS]

i just upgraded to 1 bar sd, i cant seem to get the rtt feature working, but i feel like im chasing my tail with this tune!!! it seems like as soon as i give it what its asking for, my afr will go in the opposite direction, or my idle will fall apart.... im sure its my fault due to my inexperience, can someone thats smarter than me take a look???

its an 02 camaro ss m6
just installed a 227/234 115 lsa
obx lt's, resonators and slp cat-back
comp cams double valve springs
slp lid with bellows
melling oil pump
rollmaster timing set
ls7 lifters
stock 241 heads
ls6 intake

to be a little more specific, the car wants to stumble on itself at low rpm's when i give it atleast 1/4 throttle. wot seems to be consistant around 13.2. and at steady throttle in any gear the car lerches almost like it was missing, but im sure its not...
Attachment 33525

Attachment 33526

Attachment 33527

[HO4THSS]

anyone???

[edcmat-l1]

You're not in SD. This one is.

Attachment 33534

[HO4THSS]

SDTUNE had the maf zeroed out, thats what i was using to tune. SDBASE was what i was posting changes to, i will eat my crow, and zero out the maf.....

[HO4THSS]

still acting the same.... it takes quite a while to find idle after coming out of gear (clutch in) it will drop to about 3 to 400 rpm and sometimes stalls. once it finds idle it seems pretty smooth, i have used russ k's idle cfg numerous times and it doesnt ask for any changes. have tweaked with idle timing and it still struggles. ve and pe tables seem to be damn close but it still lerches with steady throttle in mid to low rpm's. this happens using both the sdbase, and sdtune files so i know im missing something, but i just cant seem to figure it out!

[HO4THSS]

ok, i messed around with olfa and it seems to have helped the searching idle a little, but im still not seeing any consistant numbers while trying to tune my ve... It also seems to lean out really bad at random times at idle. anyone??? please?