On my timing scan my car only goes to .36 g/cyl.
At wot.
should be .80 or so
Can my fuel injectors scale affect this?
On my timing scan my car only goes to .36 g/cyl.
At wot.
should be .80 or so
Can my fuel injectors scale affect this?
This is in speed density
forgot to take my maf off my histogram
always something simple
I noticed the same thing today.
Now I know why
Ricardo
1996 A4 FBody with LS7 swap
If your tune is scaled, that can affect it. EX: tune is scaled 50% for 1000cc injectors. When it reads .36 it is really .72 - not sure if thats your situation, but its an example that would explain a low value for some.
2000 Regal GS ~ 3.25 Pulley ~ Headers ~ 3"ex ~ 1.85 Rockers
Sold 06 TBSS ~ Front Mount T88 ~ 0-30 in 1.17 ~ 0-60 in 3.0
Wanted ~ Engine-less 95/Older 4x4 ~ Jeep/S-10/Ranger for TT Project
I just cut my injectors in half along with v/e and now I only operate on the first line .08 g/cyl.... wish I could figure out how to fix it