Results 1 to 8 of 8

Thread: GM FPR to An fitting

  1. #1
    Senior Tuner
    Join Date
    Dec 2009
    Posts
    1,084

    Question GM FPR to An fitting

    For fuel pressure regulators that are seen the 4 and 6 cylinders;
    they have a thread on the bottom but the line is just held in via a retainer.

    Is there any adapter for the return line end to an AN fitting?

  2. #2
    Advanced Tuner laser_racer's Avatar
    Join Date
    Jul 2009
    Location
    league city tx
    Posts
    461

  3. #3
    Tuner in Training
    Join Date
    Mar 2012
    Posts
    22
    Why not get an aftermarket FPR?

  4. #4
    Senior Tuner
    Join Date
    Dec 2009
    Posts
    1,084
    Quote Originally Posted by turbojbody View Post
    Why not get an aftermarket FPR?
    Particular customer wants this stock FPR with the TCE billet Adjustable cap.

  5. #5
    Senior Tuner
    Join Date
    Dec 2009
    Posts
    1,084
    Quote Originally Posted by laser_racer View Post
    No, that looks like it would go into rail, I am looking for one that attaches to stock regulator.
    Last edited by planethax; 04-09-2012 at 12:04 PM.

  6. #6
    Tuner Sharkey's Avatar
    Join Date
    Sep 2011
    Location
    Abbotsford BC Canada
    Posts
    75
    maybe post a picture of what your trying to do. i ran an lines on a 2.2 ecotec swap and i used the stock hard line off the regulator and used a -6an to 5/16 compression, worked like a charm.
    2005 Cobalt SS Supercharged
    60lb injectors, 2.7" pulley, ported blower, dual pass intercooler with option B, cobra heat exchanger, devils own alcohol injection, clear image mid length header, 2 1/2" catless exhaust, zzp intake, powell motorsport "rotated" mounts, hurst shifter, Pedders springs, ss/tc struts, hawk pads and r1 rotors

  7. #7
    Potential Tuner
    Join Date
    Oct 2010
    Location
    Lehigh Valley PA
    Posts
    7
    do you mean this?

    Russell - 3/8" SAE quick-disconnect male to 3/8" SAE quick-disconnect female with 1/8? NPT female side port - PN: 640730

    ____________________________
    09 Cobalt SS/TC - Sedan & Coupe

  8. #8
    Senior Tuner
    Join Date
    Dec 2009
    Posts
    1,084
    No, I was looking for a connector that connects to the stock fuel pressure regulator.

    This is just for aesthetics for a customer, probably just going to use -6AN - 5/16" compression fitting.