Why is this happining ?
Why is the yyyyyyy letter next to the Serial ?
Yes the Car has been tuned before.
What do u recomeand i do, Reflash with a Fresh file Using Tech2 ?
Thanks.
Why is this happining ?
Why is the yyyyyyy letter next to the Serial ?
Yes the Car has been tuned before.
What do u recomeand i do, Reflash with a Fresh file Using Tech2 ?
Thanks.
Last edited by Engine_HP; 02-25-2012 at 03:22 PM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
emmmm,
whats my options now ??
flash fresh using Tech2 or download a stock file with the same year (2002) model (C5 Z06) then change VIN ???
Thanks
License the year/model and tune away.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
i searched the Tune Repository didnt fined a year/model for my 2002 zo6 m6
whats my option now ?
Whats wrong with doing the year/model licensing with the file you posted? Other than the fact that you only have 2 credits the file should still license fine with 6 credits.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
nothing wrong but i dont want to pay 4 credits extra.
plz advice.
Get a pcm that doesnt have a corrupt vcm id block.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Ok a friend of mine emailed me a z06 2002 m6 stock file, ill add License to the file then Flash using "Write Entire" after that ill change the VIN (ill put back my cars vin back)
will i have problems putting back the cars VIN
Licensing someone else's file is not the answer . you still need a license for the pcm
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
ouch, i thought write entire will over write the pre-file even tho the pre-file isnt licenced.
i guess ill flash a fresh file using TECH2 tomoro.
Tech 2 won't be able to fix the issue.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Ship the PCM to me and I'll flash a 2002 Z06 file to it of your choice so you don't have to license extra VCM ID's. Basically HPT licenses the VCM ID which in your PCM is corrupt. The only way to flash the PCM is with a Year/Model license or a complete Gen3 unlock.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
OK i have Licence 6 credit year/model, now its asking me for 2 more credits for the RTT OS, is that regular ?
You made no mention that you are using a custom operating system, but yes you will need to license any custom operating system you've applied to the file to be able to use it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Guys,
whats the correct procedure of changing VIN ???
this is what i did:
I Write Entire with different VIN (2002 c5 z06) that i pulled out of the Repository then i clicked Flash > Change VIN (using VCM EDitor).
when i start the car it dies strat after, i switched off Security VATS now the car starts and runs fine but the Security indicator in the dashboard goes on.
i tried the Flash > Relink VATS and still Security light is on
any ideas
Last edited by Engine_HP; 04-09-2012 at 05:44 PM.
Change the VIN in the tune File to match your vehicle and enable VATS, do a write entire then relink VATS again