Results 1 to 5 of 5

Thread: engine TR Deleivered

  1. #1
    Advanced Tuner vette_c6's Avatar
    Join Date
    Jun 2008
    Location
    Kuwait
    Posts
    390

    engine TR Deleivered

    engine deleivered trq in the pic is 640
    from 3800 rpm when i hitted the throttle ( full )
    and its start dropping on 6000 RPM

    the car is boosted 12 PSI and it have slip in the belt

    the question is ,,
    is it my scanner ,, reading MAX number 640 ?
    if yes ,,, is there is a way to look at greater then this number ??

    i hope i can get some info about this information

    cheers
    Last edited by vette_c6; 03-13-2012 at 05:18 PM.

    specialize in: V8 Tuning (Kuwait)
    Abdullah Al-najdi
    00965 99369929
    www.youtube.com/alnajdi83
    Tuners ! Quit Raping your PE TABLE !
    instagram : alnajdi83
    best number in 1/8 mile 4.54 ( My Driving + My Tune ) !

  2. #2
    Advanced Tuner
    Join Date
    Nov 2007
    Location
    Minnesota
    Posts
    555
    If you right-click your chart and edit it, you can change the min/max values of the data you are logging. However, I think 640 is the upper limit for that specific data based on your tune. I may be incorrect.
    2012 Chevy Cruze A6 1LT RS

    Formerly - 2004 GTO, 2002 Z28, 2007 Colorado, 2008 Silverado

  3. #3
    Advanced Tuner vette_c6's Avatar
    Join Date
    Jun 2008
    Location
    Kuwait
    Posts
    390
    i guess u are correct

    its a shame that i didnt see the number ,, because its a camaro with 416
    TVS2300
    and i was hopping to look at a higher number ,,,
    anyway ,, there was a Slip ,, and lets see what will i do for it

    thanks ,, and i hope one of the support guys answer and feed us back with the engine Deleivered Trq

    specialize in: V8 Tuning (Kuwait)
    Abdullah Al-najdi
    00965 99369929
    www.youtube.com/alnajdi83
    Tuners ! Quit Raping your PE TABLE !
    instagram : alnajdi83
    best number in 1/8 mile 4.54 ( My Driving + My Tune ) !

  4. #4
    Advanced Tuner
    Join Date
    Nov 2007
    Location
    Minnesota
    Posts
    555
    I have something better for you to use from a very smart man named Marcin:

    http://redhardsupra.blogspot.com/201...1_archive.html

    Marcin gives tips how to setup your charts to simulate HP/TQ if that is what you are trying to do, specifically the DynAir(G/sec) and DynCylAir(g/cyl). Set the upper limits when logging both so that you get a "Dyno chart" type effect.

    His blog has a lot of good information that I recommend as reading to anyone that tunes be it the seasoned tuner or the noobie.
    2012 Chevy Cruze A6 1LT RS

    Formerly - 2004 GTO, 2002 Z28, 2007 Colorado, 2008 Silverado

  5. #5
    Advanced Tuner vette_c6's Avatar
    Join Date
    Jun 2008
    Location
    Kuwait
    Posts
    390
    thanks for the link ,, its great

    specialize in: V8 Tuning (Kuwait)
    Abdullah Al-najdi
    00965 99369929
    www.youtube.com/alnajdi83
    Tuners ! Quit Raping your PE TABLE !
    instagram : alnajdi83
    best number in 1/8 mile 4.54 ( My Driving + My Tune ) !