WOT tuning with wideband

[R8SVton]

Hi guys,
I did a WOT run using my wideband this morning. When I go to the histogram under the Air Fuel Ratio Error, do I click on the [A] icon for the average reading to copy and paste to my VE table or do I click on the [L] icon for the last results of the scan even if its only one run.
What is the CORRECT one to use?
Cheers
Tony

[R8SVton]

Anyone, cause in THE TUNING SCHOOL books they say to use the [L] icon but I hear people say to use the [A] icon.
Cheers

[01ssreda4]

Average makes more sense to me, so that's what I use.

[Gh0st]

Average and ideally you'd want to set a minimum of maybe 10-15 cell hits for more samples to base your information off of, in my opinion of course.

[R8SVton]

Average and ideally you'd want to set a minimum of maybe 10-15 cell hits for more samples to base your information off of, in my opinion of course.

I been set at a minimum of 10 cell hits.

Cheers