2005 F250 Aust 5.4 Help.

[Apples]

Hi Guys,
I have a Australian Delivered Brazil built 2005 F250 5.4.
Has anyone tuner one as I cant get HP tuner to find the pcm.
Any info would be appreciated.
Allan

[VYSSLS1]

appears there is a problem with this... i have a australian delivered 2006 model doing the same them...

they are on the supported list.. which is a worry...

[1998Ws6]

it may be an EEC-V controller, not a power PC, does this have a throttle cable or ETC?

Even if ETC, the F250 uses a completely different template than the F150 of the same year. not being US built makes me think it is a carry over vehicle, from the older 2004 setup.

[VYSSLS1]

ill have a look tomorrow, i think they are ETC,

if thats the case its a shame i have wasted 2 credits seeing it says F trucks are supported on the supported page...

looks like SCT will be the only go

[Apples]

I checked my pcm found its a 2001 EEC-V
It would seam all Aust F250 I have looked at are based on the 2001 truck.
If the truck was made in Brazil / Australian delivered then it used 2001 gear even up to 2006.
My truck is a 2005 with a 2004 engine and trans with throttle cable and a 2001 EEC-V pcm.
I have been looking to see whats out there to program it but no one can give me a definitive answer.
Let me know if you find a good setup.
Apples

[VYSSLS1]

i have SCT so ill just use that to do it...

they support the 2001 models...

pain in the ass and maybe the supported list needs to be updated...

[Apples]

Please let me know how you go with SCT.

[VYSSLS1]

it will work fine, ive done the EEC-V PCMs with it before,

limited in what you can do but gets the job done