Injector Size help

[codyvette]

I recently added an ls6 intake, shorties,hollowed cats, hand ported TB,and a very small cam to my 00' z28. Cam is 216/220@ 050 .525/.532lift on a 114LSA. When i did the install I went ahead and went with the 02' injectors wich are slightly bigger. Is this unneeded and a bad idea? I have read some info on flow rates and how vacuum influences it, but I am new to tuning and would rather spend my research time somewhere else if the 00' z28 inj. would be fine. Any help is greatly appreciated.

[edcmat-l1]

If they're stock GM injectors, just pull an 02 tune off the tune repository and swap over the inj. data. BAM! Done.

[Iam Broke]

I have about the same setup but putting in a 208/212 115 ~.56x" lift on E85 so I upped it to 42# injectors instead of the factory ~28's

Stock cam on 50% Ethanol was pushing the IDC over 90% so I knew I needed more injector.

[codyvette]

If they're stock GM injectors, just pull an 02 tune off the tune repository and swap over the inj. data. BAM! Done.

thanks,guess common sence should have told me that