(This question was originally tacked onto another old thread but now I started a new thread with a more accurate title for the information I'm looking for)
I'm working on a 2011 Escalade with a magnuson SC.
It has pink injectors with the part number 0 280 156 030
0280156030 (listed both ways to help with future searches)
I found this number on the Bosch spreadsheet here http://www.hptuners.com/forum/showth...ch+spreadsheet
I still dont have the data I need, but by comparing with the info on Greg Banish's DVD I found that the Flow Rate listed by Bosch at 400 Kpa and at 300 Kpa equals Gregs flow data for the 39lb injector x 0.956.
So what i'm going to do is use all of Greg's data and multiply it by 0.956
Does anybody have any better ideas or better data?