Results 1 to 15 of 15

Thread: 3800 fans won't turn on @ any Temps. Can control with VCM Controls

  1. #1
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    7

    3800 fans won't turn on @ any Temps. Can control with VCM Controls

    2000 Bonneville 3.8 non supercharger. 180 degree stat. Fans will not on turn at set temperatures or any other for that matter. No Codes. VCM Control will turn fans on low and Hi. Unplug sensor will throw codes and turn fans on. I have tried many combinations and spreads. Last settings tried. Please Help!!!!
    Attached Images Attached Images
    Last edited by SHIPMANLIGHTS; 02-01-2012 at 04:43 PM.

  2. #2
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Location
    Melbourne, Australia
    Posts
    5,194
    disable Climate Control override, in some vehicles (like yours) the HVAC system controls the fans.
    I count sheep in hex...

  3. #3
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    7
    Thank you for the fast reply. I have had it both ways. Still fans will not turn on. with any temperature settings.

  4. #4
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    7
    Is this a software problem or internal CPU problem? If I can command the fans via VCM what can it be? Any help greatly appreciated !!

  5. #5
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Location
    Melbourne, Australia
    Posts
    5,194
    please email support with your stock file so we can check it out.

    Chris...
    I count sheep in hex...

  6. #6
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    7
    I did. Thank you. I received an email stating that it didn't look like the stock file. That is all I have. Can the problem still be determined?

  7. #7
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Location
    Melbourne, Australia
    Posts
    5,194
    ok it was a bug, fixed in 2.23.511 or later, support will probably contact you when the download is available.

    Chris...
    I count sheep in hex...

  8. #8
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Location
    Melbourne, Australia
    Posts
    5,194
    btw, before you install the new version please change the climate control override value back to whatever it was originally.
    I count sheep in hex...

  9. #9
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    7
    Thank you for the help. I really appreciate it. I emailed a couple logs with fan info and the last tune file to Bill. I know this broad question, But How long does it usually take for the software update?

  10. #10
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Trenton, NJ
    Posts
    21,372
    Its already built, I'm just waiting to hear back so I know where to upload it
    If I hear when will Dodge be ready one more time...I might do one of these



  11. #11
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    7
    Email sent. Thanks!!!!!

  12. #12
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    7
    I am impressed!! Whatever you all did works perfect. Less than 24 hours from when I posted my problem, you solved it and have me up and running. That's Service!! A++++++ Thank you!!!!

  13. #13
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Location
    Melbourne, Australia
    Posts
    5,194
    Glad you're up and running
    I count sheep in hex...

  14. #14
    i'm a huge 3800 hundred fan and it doesn't take me much to get turned on. just sayin
    2001 3.8 v6 camaro, T5, ford 42lb green top injectors, grand national .63 a/r turbo. 8psi. stock motor, ngk tr6 plugs (one step colder) 91 octane.

    2001 4.3 zr2 s10. daily driver, 31" tires, 4x4, cat! and exhaust. looking for mpg.

  15. #15
    Tuner
    Join Date
    Dec 2011
    Location
    Melbourne, Australia
    Posts
    82
    i think i'm suffering from the same issue where can i get the updated beta from?

    i'm only using fan#2 ground and i can manually activate but i can't get it to run any other way

    thanks chris

    edit: tried the new beta to no avail can activate fan #2 trigger in vcm controls but it will not activate with regards to specified temperatures
    Last edited by vltrb-0; 04-11-2012 at 06:50 AM.