OK, I have spent quite some time researching and studying how to tune a vehicle. My truck is a '00 Silverado, with a 6.0/4L60E combo. It has factory everything and I just wanted a stock 6.0 tune put in it since it had a 5.3. I had it tuned about a year ago in a local shop here and needless to say they did not impress me. It ran pretty bad and I just got tired of it so I got this software and decided to give it a shot myself.
So I started by finding a stock 6.0 tune and found out that the tuner changed very little from the 5.3 tune. So I put all the same parameters and pretty had to change 70% of the tables. After that the truck ran great, idles nice, drives great. I want a bit more power, so after more research I found how to adjust the tranny, VE, and MAF tables.
I would greatly appreciate it if some of the great minds on here can double check my work and maybe give me some pointers on where to go from here. I would really like to start working on the spark tables but am a little cloudy on how to approach it.
Also, I do have a NGK Powerdex WB 02
Thank you in advance,
Adam