i have a plow truck that i got off a guy and the trans was blown which was a 4l60e. i had a fresh 4l80e on the shelf i put it in thinking that HP TUNER would have support but i don't think they do. i have a couple of changes to make and the job would be done. anybody know if this vehicle has support?
not on 96. You can update the PCM to a 98 PCM or a 0411 and tune it that way.
what is a 0411? i looked at the pinout charts between a 98 to a 96 they are very different.
pcm?
The 411 is a newer pcm that can be used on the sbc vortecs.
My setup is a 356ci with a 260/268 (212/218 at .050 lift) duration cam with aluminium corvette heads and flat top pistons running 11.3 comp. ratio. with tuned port injection and vortec crank pick up and dizzy running a 411 pcm and 60lb bosch injectors, 1.6 ratio roller rockers.For transmission its a 4l65e built with the monster in a box mega ss kit.
All in a 92 chevy ext cab 4x4 pickup with a 98 cab now installed with a third door!
running only e85
I just by off of the dyno today I put a 98 computer in and repined the truck and worked really well
Reply With Quote