'02 WS6 A4 Wideband through EGR?

[Iam Broke]

I have searched a bit to no avail...be kind.

I have an '02 WS6 A4 and wish to log my Auto Meter (Bosch) wideband in Lambda into the ECU and HPT. I have no HPT pro and need some direction if and how this can be done. Wiring inputs would be appreciated.

I can scale the 0-4v output from the wideband and develop the cfg and histos ok, just need some wiring connection tips, ect.

I prefer tuning in Lambda coming from the turbo LNF world and running a not so common ethanol blend of 47 to 60%. (Stoich is 11.25 afr on E60)

Spent the last summer toying with the WS6 after selling the LNF Cobalt SS and need some guidance. It had a Superchips tune on it and I have shaved 1.2 sec off the 60 - 100 time tuning it so far but need the wideband wired in so I can safely lean it out some and get it dialed in. Cam and springs this winter so a WB is a must. TIA.

[PAT WS6]

Wire to egr 5v ref, verify the right pid (look under my recent thread, i had the same problem) i believe its pin 41 u wire ur wb to

[Iam Broke]

Thanks for the reply, I'll search for it tonight.