Results 1 to 7 of 7

Thread: EIO Output (configuration cannot be saved)

  1. #1
    Potential Tuner
    Join Date
    Dec 2009
    Posts
    4

    EIO Output (configuration cannot be saved)

    For some reason, I cannot seem to save a EIO Output configuration.
    There is no save/"disk" icon. Has anyone run into the same problem?

    Am using v.2.263

  2. #2
    Senior Tuner
    Join Date
    Feb 2009
    Posts
    1,931
    When you close(small x under larger x in top right corner) it will give you the option of saving.

  3. #3
    Potential Tuner
    Join Date
    Dec 2009
    Posts
    4
    still doesn't work.. I right-clicked to "Configure Output", which pops up the small window to configure the two outputs.. when finished configuring,
    I exited this small window and nothing was accepted/saved

    If I hit return on any of the Disable Trigger or Enable Trigger formulas,
    I just get beeps

    am i missing something obvious?

  4. #4
    Tuner in Training
    Join Date
    Jun 2011
    Posts
    17
    It’s a known bug in the current beta version- no fix out yet.

  5. #5
    Tuner Mike04's Avatar
    Join Date
    Feb 2007
    Location
    Orange Park Fl
    Posts
    104
    Any update on this, I have the current Beta and it doesn't save. I'd like to use the outputs for lean AFR under boost.
    RHS Block 427, Mast/ PI 275 Heads, A&A YSi SC, 3.125Pulley, 238/254 LSA116+5, Flip Drive, AR 1 7/8 Headers, Corsa Touring Cat Back, RPM Level VII Tranny/ Flexplate/ Drive Plate, PFADT Carbon Fiber Drive Shaft, RPM rebuilt DTE Stage 4 3.42s, Vigilante 3 Disk 2600 converter, Custom Fuel System with Dual A1000 Pumps, ID 1000 injectors, Triple Nozzle Alky Control, 3 Bar SD Tune using 2.5 MAP. 935rwhp 800rwt

  6. #6
    Tuner in Training
    Join Date
    Jul 2006
    Location
    Quikville
    Posts
    47
    bump

  7. #7
    Tuner in Training Alain2's Avatar
    Join Date
    Feb 2012
    Location
    New Brunswick, Canada
    Posts
    17
    Quote Originally Posted by 02_TA_RamAir View Post
    It’s a known bug in the current beta version- no fix out yet.
    So HP Tuners Pro is a product that doesn't work as advertised.

    I bought the Pro to datalog specific outputs but it doesn't datalog user configured outputs????