Just looking at and making minor changes to a friends tune and i noticed that i didnt change the Peak Torque table to match the driver demand table. Seems to me that it needs to be the same or higher than driver demand.
Is this a bad thing that i didnt change it or bad that now i have changed it?
I also went and changed the Pilot timing tables to match the default tables. I am going to go back and finish the tables with the calculator and make the changes for the 55 - 50 - 45 instead of 50 across the board.
Also he is complaining about it feels like from 1/2 throttle to WOT that it runs the same.