Hi All,
I sent a PM to Greg, but fully understand that he is busy and may not get back in a timely fashion. I Have a 2001 C5 on the dyno which we decided to put green top injectors in specifically to take advantage of good "known" data from the DVD I purchased. I knew the quality of the tune would be that much better and issues like decel, etc should line up much better with this data. I checked, rechecked, and checked again that my data is correct in all fields, but find myself close to 40% lean with this data and the green tops. Fuel pressure is correct, maf table is bang on (LPE 100 - as per their table) and the tune was quite close before with known good injectors. The only change was the injectors, and populating all the tables accordingly. Car runs in maf only mode. WHat I found surprising is that after searching other threads, I can see at least 3 other people who have this exact 40% lean issue. I'm fully expecting the issue to be on my end, but now that I see three others with the same issue, am starting to question the data provided as well. Hoping others can chime in with information. I will gladly post the tune, but don't want to have issues with letting info out publically that Greg may not appreciate.
Much appreciated.