3.29 Gear Swap

[Lumpo]

So i went to the "Calculated Gear Ratio" and changed that to 3.69 and then hit commit but my car doesnt kickdown at the same MPH as before the tranny. Can someone post up your 3.29 WOT MPH table so i can compare to mine. Im trying to get my 3.29 tranny to act like my 2.93 tranny.Thanks

[murphinator]

umm.... its now geared differently so its going to kickdown at lower mph's unless you have also made valvetrain changes to rev much higher

[Lumpo]

I understand that im asking what you guys with 3.29 gears have your WOT shifts and kickdowns set at for best results...

Anyone wanna post up your WOT shift speed table so i can compare to mine? Would you change anything about mine?

Heres my "Shift Speed vs. Shift".




Here is my "RPM vs Shift"



My car is going to be down for a couple of days so i cant get out and figure it out for myself so just wondering what you guys have found to get the best results with the 3.29s. Thanks

[Russ K]

The shift points will be 12% lower with the 3.29 ratio. You could take a stock file and just enter the stock tire dia & 3.69 gears, make sure that the Auto Scale Trans Tables is yes and hit the commit button.

Now you can fine tune the trans shift & TCC speeds.

Russ Kemp

[REDNECKRACING]

here is my file that i run with my 3.29 gears. i like it.