2011s

[edcmat-l1]

When will we have coverage? Specifically, the GT500s.

Anyone out there tuning them with SCT?

[Bill@HPTuners]

Still a ways off Ed, currently working on getting dodge functional...we have a 09 fseries pcm that is similar to the 2011's(but not identical) but having the same issue...we've done a pretty extensive amount of work to try and get it to talk but thus far no luck...we'll likely revisit late 2011 or sometime in 2012 depending how things shape up over the next few months.

[edcmat-l1]

Still a ways off Ed, currently working on getting dodge functional...we have a 09 fseries pcm that is similar to the 2011's(but not identical) but having the same issue...we've done a pretty extensive amount of work to try and get it to talk but thus far no luck...we'll likely revisit late 2011 or sometime in 2012 depending how things shape up over the next few months.

K. Disappointing though........

[Rippin07]

yup, have a new Roush 5XR, would love to play with it, but no go.

[LSxpwrdZ]

Same here I have a dozen '11 5.0's wanting some tuning done... guess I'll have to find something elsewhere to tune them with.

[edcmat-l1]

Same here I have a dozen '11 5.0's wanting some tuning done... guess I'll have to find something elsewhere to tune them with.

SCT, but even they are having some issues with the templets. I've got Diablosport for the Fords, too, but I believe they're a little behind on the 2011s.

[LSxpwrdZ]

I had been researching both CMR and Advantage 3 from both SCT and Diablosport and can't decide on one. SCT is extremely buggy from what I've heard and Diablo is behind the 8ball on things. Dang'd if ya do and dang'd if ya don't.

[jah81592]

SCT buggy? Where did you get that information from? Damn good software!

[rynez06]

I had been researching both CMR and Advantage 3 from both SCT and Diablosport and can't decide on one. SCT is extremely buggy from what I've heard and Diablo is behind the 8ball on things. Dang'd if ya do and dang'd if ya don't.

cmr is a joke, i have it.... horrible customer service, and behind on the ford stuff

[edcmat-l1]

SCT buggy? Where did you get that information from? Damn good software!

Yeah, but. The 2011 stuff is kinda buggy. Incomplete, mislabeled stuff, etc.

I've also run in to other bugs with other Fords in SCT, but all in all, it's the best stuff out there for the Fords.

[LSxpwrdZ]

Well that's good to know. I like feedback from those with experience with the software before I spend my hard earned money on it to tune them turd fords haha.

[cobaltssoverbooster]

i want one of these 5.0 2011-2012's apparently they are expecting big gains from some minor bolt-ons. did i receive bad info there?

[Tunning @ LMR]

Any updates on 2011 ford stuff???

[SultanHassanMasTuning]

updates??????? 2011 mustang 5.0 are needed

[tramotorsports]

+1 on the 5.0 stuff.... Badly needed. SCT has got this on lock. Seems HP would benifit hiring a ford engineer. :-)

[Higgs Boson]

yeah, i want to buy a new GT for a daily and I am holding off until HPT supports them because I can't bear to drive an untuned vehicle......CRAZY!!!! but serious.

IMO, this one car is in higher demand than ALL of dodge.....I die a little just by sitting in a dodge.

[1badtk]

Tuned a Ford 5.0L 2011 Ford SXR? from 330 rwhp stock to 372 rwhp with headers and CAI using SCT with no problems. Mustang Dyno.
I've been using SCT since 1999 on the Ford Lightning's and Mustangs.

[1998purplez28]

Any updates on 2011 2012 Ford Mustang 5.0 Tuning Support?