I am swapping the injectors in my 2000 C/K truck with a 7.4L engine. What do i need to change in my tune besides the injector flow rate the stock injectors are 19.4lbs/ H and the new ones are 23.3lbs/H
I am swapping the injectors in my 2000 C/K truck with a 7.4L engine. What do i need to change in my tune besides the injector flow rate the stock injectors are 19.4lbs/ H and the new ones are 23.3lbs/H
all the other injector parameters that are available also need to be set correctly.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Here is my stock tune and my current tune. the injectors I put in are GM part number 25313185 and the specs i could find on there are lbs/H 23.3 cc/min 244.9 grams 176.1 43.5 psi