Results 1 to 3 of 3

Thread: pe before be quick question

  1. #1
    Advanced Tuner robbyredneck's Avatar
    Join Date
    Jan 2010
    Location
    fingerlakes ny
    Posts
    356

    pe before be quick question

    ok guys you can light me up if you must. but i have noticed that if my car goes into boost at light throttle i.e. <40% my be will command the requisite fueling without going into pe, but my stfts will pull fuel like crazy. so my question is. is this common and should i just lower my pe requirements?
    04 6.0 silvy china turbo
    87 gn
    03 stroker evo ww
    00 ss camaro

  2. #2
    Senior Tuner Frost's Avatar
    Join Date
    Jan 2006
    Location
    Richmond VA
    Posts
    1,950
    This post details adding timing around boost but also explains the PE/BE issue that you are seeing: http://www.hptuners.com/forum/showpo...8&postcount=11
    Steve Williams
    TunedbyFrost.com


  3. #3
    Advanced Tuner robbyredneck's Avatar
    Join Date
    Jan 2010
    Location
    fingerlakes ny
    Posts
    356
    thanks so much steve. i know you have been ringing this bell for a while. and on a side note , thanks to all of you guys for helping me get my turbo regal dialed in, it is an absolute animal. i can induce tire smoke at any speed up to 60 and idles like a stocker.
    04 6.0 silvy china turbo
    87 gn
    03 stroker evo ww
    00 ss camaro