I have an 04 LS6 engine and computer in a Factory5 GTM with twin turbo's, 2BAR OS/MAP on the dyno right now. The high octane and low octane tables are the same, the TM has been 0'd out, as well as all the Spark modifiers (that I can find, maybe I'm overlooking something).
At WOT and only 3-4lbs of boost, trying to get about 21-22 degrees of timing, based on the High/Low Oct tables, but the scanner shows only 14-12 degrees. Here is the data log and tune file. . .
You must be looking at the spark tables wrong, you're getting in the scan what is commanded in your high octane table.
2000 GMC 2500 2-bar SD
Stock LM7, LTs, TBSS intake manifold
Yeah its logging exactly what you are telling it to do.
I just noticed it, on the pull after I wrote this. . . I do have a log that show'd 12 degrees at .52 g/sec.
are you logging burst retard.?
04 6.0 silvy china turbo
87 gn
03 stroker evo ww
00 ss camaro
Reply With Quote