Email support and they will link it to your customer page.
Email support and they will link it to your customer page.
By emailing support with your serial number and requesting the newest beta.Originally Posted by LS4FTL
If I hear when will Dodge be ready one more time...I might do one of these
Anyway to get a generic 2011/12 Cruze file posted here for us to download and take a look at now?
96 LT1 Camaro project
00 Z28 Camaro Project
12 Cruze ECO - modded
If anyone has a 2011 Cruze with os id 12644082 you are more than welcome to post it up in this thread. Unfortunately for the security of our customers we do not post tune files.
If I hear when will Dodge be ready one more time...I might do one of these
i downloaded the latest beta again this am, diff 3 digit prefix on the end, and i am now able to open my file! These Boost control functions are kinda confusing with the duty cycle function basis. I kinda understand that aspect from dealing with aftermarket boot controllers but i can see this being alot of trial and error too. The BOV adjustability is nice too! Nowto figure out how to NOT get it to dump boost on a WOT flat foot shift only.
96 LT1 Camaro project
00 Z28 Camaro Project
12 Cruze ECO - modded
Got my prelim edits done but.......!!!!!!! Emailed support, lol.
Yup i changed some stuff too, nothing with boost yet till i get some free time to sit on the dyno with a wideband at minimum. torque managment and timing are first on the list.
Lunch time in an hour, the playing will begin!
96 LT1 Camaro project
00 Z28 Camaro Project
12 Cruze ECO - modded
Yeah it looks like the software isn't picking up the vcm id number when flashing. I'll talk to Chris about it tonight.
What this means is single vcm licensing will not work temporarily until we fix whatever the issue is.
Year/model licensing should work without issue though(since our software won't care what vcm id number is there in the pcm). Because year/model licenses for these applications are pretty cheap(I think they are only 6 credits) it might not be a bad idea to do it this way if you want to play with your vehicle right away.
I've also added this information to the two threads I started as well as all the beta emails going out.
-Bill
If I hear when will Dodge be ready one more time...I might do one of these
New beta up 2.23.632 that should fix the single vcm licensing issue.
If I hear when will Dodge be ready one more time...I might do one of these
Worked for me.
Can anyone share a stocker tune here?
Cheers
Attached is my stock 2012 Cruze ECO M6 tune
96 LT1 Camaro project
00 Z28 Camaro Project
12 Cruze ECO - modded
what's the best way to find out more on tuning closed loop boost? duty cycles and waste gate tuning is new to me. just increase duty cycle until you get the boost you want?
also, anyone else notice its ve and maf hybrid all the way to 7000? what are the consequences of moving it to full maf around 3k?
also, what's the time frame for the tcm? the stock tune sucks.
Last edited by Higgs Boson; 06-15-2012 at 10:01 AM.
super early at this point to tell, I don't even thing we've sourced the tcm as of yet.
If I hear when will Dodge be ready one more time...I might do one of these
Since this thing runs off of torque numbers for just about everthing, this method is kinda a backdoor way to raise the boost, but its where i plan to begin starting. I havent turned off the that VE yet in my dabbles, but when i do in Gen IV v8 cars, i think it makes a nice improvment in responsiveness and driveability.
I made changes to timing to get it to sustain 10-12 degrees with hints of 1-2 degrees of KR, upped the TM figures and brought PE in WAY sooner so its not so scary lean for the first couple thousand rpm, its a whole new car! Even at the 210 kpa its making in 93 degree temps today. This thing feels faster now on stock boost than with the mail order tune where it has 21. Its alot more linear and nice to drive in comparison. it actually PULLS to 6k now, instead of hitting hard at first then going bleh up top. I love it! thanks HPT for making tuning for these cars available!!!!
Last edited by BAD LS1; 06-15-2012 at 01:32 PM.
96 LT1 Camaro project
00 Z28 Camaro Project
12 Cruze ECO - modded
Scanned my first one todayIl probably start tinkering with it tonight. For some reason I was thinking that this car would have came with a factory wideband like the lnf but guess not. maybe I just need to adjust my scanner. Is there any plans to support the auto 6speed?
HP-Unlimited Tuning and Custom Fabrication
Houston area performance parts dealer
2007 first ever LNF swapped cobalt.
1989 Chevy single cab 5.3 swap "Turbo to come"
2012 Chevy Cruize bone stock mid 14s on 93octane and tune
yes the a6 will be supported
I count sheep in hex...
I was told they do have a factory wideband. So your saying it does not?Scanned my first one today
I do not know. My best friend just got one so I will have acess at some point (I know his is a auto).
They do not... narrow bands pre and post.
96 LT1 Camaro project
00 Z28 Camaro Project
12 Cruze ECO - modded
Any time frame on the E39?
Reply With Quote
