I am attempting to change the PCM to a 2-bar map. I typically use HPT but was told I can use TinyTuners to alter other tables and reflash with HPT.
I have the bin and am looking at these MAP values.
Default MAP Scalar: 0.1799316
Default MAP Sensor Offset: 10
Default Max MAP: 98.00781
MAP Scaling Factor: 0
MAP Sensing Offset: 10.332
P0121 Error Max MAP: 70
P0121 Error Min MAP: 50
What is it that needs to be changed and why, to allow a 2-bar map?
Should MaxMAP be (98.00781 * 2) = 196.01562....?
Thanks
was brought up in another thread but the topic changed so here is the new post.