I’m new to the VCM Scanner and Suite program and have a few questions. I purchased the MPVI Pro and have scanned my 1998 GMC 7.4L truck as well as my 2009 Cobalt SS 2.0L TC. The issues I’m running into are
1) Following the help instructions I can not data log with the interface alone. I get an error as soon as I press record.
2) The data captured (from the GMC) doesn’t seem to stay the histograms and only seem to be supported
3) On the Cobalt there seems to be a cal liberation issue I never see a TPS below 15% or above 85%
I have tried setting up different PID’s and configs but have seen no change. Any words of wisdom for a beginner as to extracting data and setting up configs?