Specs:
- '05 vette LS2, w/E40, 6 speed man.
- 404 c.i. forged
- Procharger @ ~12 psi
- 235/242 614/624 115 lsa
- 60# injectors
- 2.5 bar OS w/2.5 bar MAP (with proper info)
- twin walbros, returnless system
Car idles good at 850 rpm, no surging, etc. My problem is I am maxing out the Boost VE around 130 kpa. I should make boost up to about 175 kpa. Hopefully I am just overlooking something.
At the same time I built the motor, I also changed it over from an A4 to a 6 sp. manual. That is why it shows automatic parameters.
~Tim
I included my config file I am using. I have my wideband reading through the A/C high pressure.