Fogive me for any errors in what I'm writing down as it's been a while since tuning my car and configuring the scanner so what I'm referencing may not be right. Anyways when we tune for MAP vs RPM in the VE Table, we're generally targeting stoich for anything below PE. Go through the process of multiply by half, paste, etc etc to get within +/- 1 or whatever we feel comfortable with.
Now in the lower rpm columns and lower MAP rows, a large cam will surge to some degree so we generally try to make these cells a bit richer, which I know for me has been a manual process of adding 10%+ after tuning the whole VE table.
I'm curious if there is a way to automatically when tuning, especially during RTT, add a +10% target fueling to the troublesome cells we know need to be richened up a certain amount (ie the table is targeting 14.6, but in lower areas we want to target say 13.2). There may already be a way to do this in the scanning software or editor and it's just not apparent to me, but if anyone can help direct me in the best way to configure this it would be of great help!
Thanks all!