Results 1 to 6 of 6

Thread: 2001 Cammed LS1 Camaro need tuner

  1. #1

    2001 Cammed LS1 Camaro need tuner

    Ok so my friend has a 2001 camaro with a cam and some other minor mods ..


    I need a tuner that can tune for this ..

    He says it is just running rich and the guy that tuned it just used a can tune and efi live and he is running 91 now vs 93 and hes at 6000 ft vs near sea level previously thanks..

    who do you all reccomend / bang for the buck
    Last edited by BowTieTillIDie; 07-25-2010 at 05:04 PM.

  2. #2
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    What area are you in?
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB

  3. #3
    Senior Tuner Higgs Boson's Avatar
    Join Date
    Mar 2010
    Location
    Texas Hill Country
    Posts
    3,299
    says CO in the sig.

  4. #4
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    Now it does lol

    Don't know anyone out there.
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB

  5. #5
    Senior Tuner Higgs Boson's Avatar
    Join Date
    Mar 2010
    Location
    Texas Hill Country
    Posts
    3,299
    Coloradio actually, sounds like a fun place.

  6. #6
    Advanced Tuner 69lt1bird's Avatar
    Join Date
    Oct 2007
    Posts
    983
    There is a nice little town there called Tunerville, Coloradio
    Free HP Tuners Beginners Tuning Guide

    LS1 Tuning Guide
    Michigan Snowmobiler

    1969 Firebird: 11.67@114 [email protected] 1/8 1.70 60 ft. EPS cam 234/246 .602.606 114+3, 6.0 LQ4, L92 heads milled 10.5:1, Ported L76 intake, ported 90mm Holley TB, 100mm MAF, FIC Custom injectors, Hooker LT, PYPES dual exhaust with an X pipe, 4L65e with all of the good parts inside, FTI 4000 RPM Stall, 12 bolt with 3.73 gears. HP Tuner tuned by me