I have been having some problems with my STS trans am. so as one of the problems ( the car misses at idle very slightly.) the only thing i can see effecting that is the injectors. i replaced them with a set of seimens 60 # injectors that i had for another project here.
now my problem is I don't have injector tables for this. also after reviewing my tune ( that was bought from STS) I am not sure it had anything to do with the injector as they list staight 42# in the flow v. kpa table and i have read that the offset is different for the fords because of the base fuel rail pressure.
thanks guys I'm in a bit over my head and just need to get the car running