Results 1 to 2 of 2

Thread: M6 to TH350, check my speedo calcs please

  1. #1
    Advanced Tuner 96gt4.6's Avatar
    Join Date
    Aug 2008
    Location
    Kansas
    Posts
    489

    M6 to TH350, check my speedo calcs please

    Getting ready to do a car that has an M6 to TH350 conversion. Just wanted to make sure i'm not missing anything in case I run into a suprise after attempting to correct the speedo.

    Here are my calculated values to enter into the tune:

    2002 Camaro SS

    Tire Size: 275/40R17
    Gear Ratio: 4.10
    Tire Height: 25.7"

    Installed Transmission speedometer drive gears are for a 3.31 gear ratio. The tailshaft gear has 9 teeth and the cable drive gear has 22 teeth = 2.44 ratio.

    He is using a Dakota Digital pulse generator that produces 8 pulses per revolution.

    VSS Pulses/Mile: 10550
    Rev-Trans: 3.28

    Final Drive Ratio: 4.10
    Trans Revolutions/Mile: 3217.84

    These calculations were made using the information provided by Chris at post #2 here:

    http://www.hptuners.com/forum/showth...ht=pulses+mile

    Look right?
    Last edited by 96gt4.6; 02-27-2010 at 08:38 AM.
    '17 Whipple'd S550
    Too many other projects to list.....see my YouTube channel for more: https://www.youtube.com/channel/UCr7...-XfDG53sCh6tcw

  2. #2
    Advanced Tuner 96gt4.6's Avatar
    Join Date
    Aug 2008
    Location
    Kansas
    Posts
    489
    Everything worked out, Perfect! The formulas Chris gives lead to a perfect tune by the GPS for both his slicks and street tires!

    Although since he had a speedo gear ratio and a Dakota Digital pulse generator to go through it made for a little more math, but was ultimately very easy!

    '17 Whipple'd S550
    Too many other projects to list.....see my YouTube channel for more: https://www.youtube.com/channel/UCr7...-XfDG53sCh6tcw