The purpose of this program is not to replace the tuner but rather make the process a little more automatic.
Setting the program up.
Step 1.
Open config.csv
Column 1 = Location of scanner configuration file to be used.
Column 2 = Force Scanner config load. Handy if your getting logs from someone not using the same config
Column 3 = Tab required for editor? Default is 0. Don't mess with this unless you continue to have errors
Column 4 = Tab required for scanner? Default is 1. Don't mess with this unless you continue to have errors
Column 5 = Use Excel for extra math. 1 = Yes, Data will be pasted at starting A1, and re-read at cell starting A50. Excel must be installed, excel file must be named tablemath.xls and in same directory.
Step 2.
Open HistogramConfig.csv
Column 1 = Table name EXACTLY as it appears in your favorites window. Name must match EXACTLY, no extra spaces, case sensitive. To see favorites window use Control-F
Column 2 = Corresponding Histogram number 1-10 only
Column 3 = How is data to be pasted in Editor? 1 Paste Add, 2 Paste Multiply %, 3 Paste Multiply %/2
Column 4 = Smooth entire selection? 1 yes
Column 5 = Use excel to do extra math. See above. Note Column 3 in config.csv needs to be = 1
Step 3.
Open VCM Editor
Be sure the tables you wish to edit are in your favorite’s window
Step 4.
Open log file
Step 5.
Run Program
To Operate:
Open Editor and Scanner. Make sure no messages are up like Beta Warning/Info. Run exe file.
Bugs:
1. Histograms must be in the statistics mode desired IE Average, etc. Tip. If you close the scanner using average, and you never change it, it will stay in average.
2. May not detect all errors
3. Setup for Beta version 2.23x
Tips:
Care to use this on different platforms? Have a few different ways you'd like to use this? Create a few extra folders and make shortcuts for each .exe named something different. Inside these folders the filenames must remain the same however their contents can differ. For instance; Speed Density Tuning, Late Gen 4 single MAF, Late Gen 4 Multiple MAF, VE Correct only, VE + Spark + Idle Correct, etc.
Coming Next:
GUI Interface to support multiple configs, option to enable or disable individual tables/histograms.