It's been there since probably the day he made that post. It could seem unclear; that was what I was thanking him for There is already a second beta release since it's addition for at least the 156 OS.
i'll follow up with the guys, should be in beta by now but i will check.
I count sheep in hex...
It's def there for 12212156 OS. I have an 02 1500 myself and the parameters have definitely been there for it since at least the beta before last.
Great, I already emailed support. Thanks.
2000 GMC 2500 2-bar SD
Stock LM7, LTs, TBSS intake manifold
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I'm sorry then I misunderstood. All of the A/C pressure parameters other than that are in there.
Well...
For anyone with this year/group unlocked... Here are two files from my 100% OEM 2002 1500 5.3l 4l60e (Z71) truck with 12212156 OS.
The first one is 100% OEM. The second one has electric fans setup. It has the auto-recirc disabled and re-assigns that output for fan 2 control (this is the part that Bill mentioned above). Also, all of the fan setup is done in the fan control tab including A/C pressure settings.
This file was generated on the bench and has not been tested. It should be just fine, but use at your own risk.
Why do you have the A/C pressure enable settings so low?
2000 GMC 2500 2-bar SD
Stock LM7, LTs, TBSS intake manifold
i checked with the guys and it's still in progress, sorry for the confusion and delay.
Chris...
I count sheep in hex...
Those settings were passed to me by another tuner a while back. If I am not mistaken, I think he told me that he got them from Alvin at PCMforless of NC. They made the A/C nice and chilly idling around where before it was lukewarm with clutch fan so I did not change them.
I wish I weren't so busy... I have had a set of LS1 fans for my truck for about 6 months and haven't had the chance to get them on the truck. I will drive it to coastal NC next week. They would be nice to have. Alvin has a nice harness and a bracket assembly available over at his site to make this a little too easy. http://www.pcmforless.com/index.php?...per&Itemid=286
Last edited by Frost; 05-13-2010 at 11:22 PM.
I need this for the Express Van OS as well. This is a common PCM OS for swapping into older vehicles that still use a distributor. I am running 2002 OS #12212156 and tried the latest BETA as well. Nothing yet.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Awesome. Thanks for the VERY QUICK reply Bill.
Been awhile since I checked in on this. Is this in the Beta yet?
We started the 1024kb os's the week of 7/12 and got a few of them done, the week of 7/19 we had our yearly meeting so no additional tables were added that week, we got back to work on the rest of the 1024kb os's this week and progress is going well.
-Bill
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Cool, thanks for the update.
I see this is in the beta now. Awesome.
Yeah it should be in most if not all of the LS1 operating systems.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
available for the 5.3 yet?