I wanted to bump this thread since it dealt with injector data. I see that you all are inputing the injector offset vs. voltage as a decemal. It seems to me that the units are off in HPTuners because the data provided from Ford for instance on the 39lb injectors are:
Code:
Volts PW Offset (mS)
6.00 4.413
7.00 3.148
8.00 2.303
9.00 1.911
10.00 1.579
11.00 1.351
12.00 1.177
13.00 1.037
13.50 0.963
14.00 0.904
15.00 0.821
15.90 0.780
But to get it to work right under Milliseconds in HPTuners you need to input this:
Code:
Volts PW Offset (mS)
6.00 0.004413
7.00 0.003148
8.00 0.002303
9.00 0.001911
10.00 0.001579
11.00 0.001351
12.00 0.001177
13.00 0.001037
13.50 0.000963
14.00 0.000904
15.00 0.000821
15.90 0.000780
Are the units wrong on that table?