I would appreciate if someone can sendt me some reasonably close settings for 60 pounders and not talking ifr.I don't need them likely exact but I can't get my idle in line and not sure if should take out more ve or play with injector settings. Already have pulsewidths turned down to .90. Didn't mess with any other settings other than ifr.
I did get things a bit leaner by going down on ve numbers .It shouldn't be rocket science to get 60s or even 80s to run nice.My talon software can dial in injectors in a minute . Even 160 pounders.
Also get rich decel as well. I was told to play with dfco but not sure what settings exactly to set too there are quite a few sections under dfco.