Thinking about this today while logging.
I would like to be able to get a "push" of a specific
state of the bidirectional controls, while driving, and
then revert to no-meddling again, by an easy key
toggle. Like spacebar does for scanning.
As an example, for "road dyno" I would like to lock
the TCC and apply full PWM to it. But that's fussy to
do with the mouse while rolling, and if you do it stopped
you'll stall the motor.
I'd like to be rolling slow, hit the ` (back-tick) key and
feel it lock up, do the pull and hit the key again to go
automatic.
Or some other key, just a hard-to-miss one.