I haven't put on my boost a pump yet so i cant really take it over 5K so the excel spreadsheet below I only show rpms up to 5K at WOT when im commanding 11.5-10.8 in PE table. I just picked a couple rpms to show its underwhat it should be but I have quite a few logs showing same thing whatever im commanding im getting .5/.7 richer for some reason. Why is it dipping below commanded quite a bit when it should be using PE table only?
I know I have to work on my mid/upper ranges of VE table still but that shouldnt effect my WOT AFR's does it or maybe it does some with the transition from PE table to PE table as I know im quite high mid upper section of my VE table.
Cot is disabled and im not sure what else to check. Im using MAF as well and its dialed in but maxes out at 5k as well, but the AFR problem is before MAF maxes out.
Tune below. Anyone care to take a look and see if you see something ive missed in my tables?