Weird, this just started happening around 2 weeks ago...
When I hook up the LM1 onto the exhaust, the LM1 box shows the AFR reading correct, but it doesn't show anything on HPTuners?
Could the analog out be broken and need to replace a new box? or could it be something simpler?
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
I would check wires going to connector on Tuner box 1st.Originally Posted by Trailblazin'
I'll check those tonight when i get to the garage.. any ideas on what else it could be? Could a short have happened somewhere?
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
maybe blowed output of LM1 if so put on other output there is 2.
an osciliscope would be better, but you can put a voltmeter on the input to the EIO and go from there. No voltage there and you can take it to the output at LM1 itself. It should be around 2 volts.
found out wat the problem was, the analog out socket is broken... it can fixed thank god for that...the analog wire runs ok. thanks for the help
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
Reply With Quote