Originally Posted by
346ci
Well just in case anybody was interested I dyno''d the car today and it went pretty well. I thought I would share how I did it for those noobs like me who are trying to learn how to use a dyno and tune themselves.
To lock in 3rd gear (1:1 direct drive) open your VCM Scanner and connect to vehicle, select Displays, then VCM Controls, choose Trans where you will see A4 Gear Select and you can choose which gear you would like to lock into.
In addition I chose to lock the converter as well. To do this follow the above steps to get to Trans where you will see TCC Solenoid to lock the converter select On. I did not lock the converter until I got the vehicle over 25 mph, otherwise I got a bunch of bucking.
Hope this helps somebody, I know this is rudimentary to most.