Results 1 to 10 of 10

Thread: 1996 Truck 411 swap

  1. #1

    1996 Truck 411 swap

    Does anybody have a stock 2001 Savana/Express hpt file. The Truck has a 4l60e tranny.
    Thanks.

  2. #2
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,214
    This is a stock tune from a 2001 Express Van 5.0L 4L60E.

    Russ Kemp

  3. #3
    Thanks for the file. We have the truck up and running. However now trying to do the Case Learn, when revving the engine to the limiter it fails because the scanner says the vehicle is moving. It does this in either park or neatural. I also notice the speedometer moves a little to 10mph when the rpms are near 5000rpms, what could cause this problem?

    Thanks.

  4. #4
    Tuner
    Join Date
    May 2010
    Location
    FrankFort
    Posts
    50
    Any Updates?

  5. #5
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    did you wire in the park/neutral circuits ?

  6. #6
    Advanced Tuner
    Join Date
    Mar 2011
    Posts
    384
    old post batman
    My setup is a 356ci with a 260/268 (212/218 at .050 lift) duration cam with aluminium corvette heads and flat top pistons running 11.3 comp. ratio. with tuned port injection and vortec crank pick up and dizzy running a 411 pcm and 60lb bosch injectors, 1.6 ratio roller rockers. For transmission its a 4l65e built with the monster in a box mega ss kit. All in a 92 chevy ext cab 4x4 pickup with a 98 cab now installed with a third door! running only e85

  7. #7
    Tuner
    Join Date
    May 2010
    Location
    FrankFort
    Posts
    50
    Yes I wired it in. HP Tuners Scanner seems to always show me in 1st Gear though. And I can't get a case learn...

  8. #8
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    recheck your wiring

  9. #9
    Tuner
    Join Date
    May 2010
    Location
    FrankFort
    Posts
    50
    I got it all going... I took it to lextech's place , and we got it all figured out. ``

  10. #10
    Advanced Tuner
    Join Date
    Mar 2011
    Posts
    384
    what was it?
    My setup is a 356ci with a 260/268 (212/218 at .050 lift) duration cam with aluminium corvette heads and flat top pistons running 11.3 comp. ratio. with tuned port injection and vortec crank pick up and dizzy running a 411 pcm and 60lb bosch injectors, 1.6 ratio roller rockers. For transmission its a 4l65e built with the monster in a box mega ss kit. All in a 92 chevy ext cab 4x4 pickup with a 98 cab now installed with a third door! running only e85