Hi guys and gals,
I have an '08 C6 Vette A6.
Fitted with a Vortech intercooled 6psi kit.
Fitted with 750cc Xspurt injectors.
Fitted with a 2.5 bar map sensor, applied the 2 bar OS.
Conditions:- normal operating temp 205, start vehicle, run on dyno, in closed loop, short term trims are approx -15% in all cells.
After 5-10 mins. Short terms go back down to -2 to 0 everwhere.
I can't find any values that may change over this time period.
Every start this happens.
Any one experienced this before.
I originally tuned the VE map so it had -2 to 0 trims. then after 5 mins it trimmed in +15%.
Making 536 rwhp on a dyno dynamics dyno.
Thanks