Originally Posted by
BSmith
I have a customer that has a line on a 2007 Escalade motor complete with 6L80E trans. The setup is going into a '96 Impala SS.
Questions are:
1. Can this transmission work without a BCM? I.E. one of the harness companies make a stand-alone harness. I know there is a TCM in the trans, so I'm hoping it will only need to see the ECM.
2. How would we go about the shifter setup? Most likely going to lose the manual shift capabilities, but I can just tune the regular tables to where I want it. (Assuming it's similar to a G8 setup...) I assume it still has a physical cable setup to get it out of park and into reverse/drive.
3. Am I missing anything here?
Thanks in advance everyone.