I added a ZZP stage 3 trans a week ago, it came with: 3.29's, 2500 stall, 1" GMR chain, reluctor wheel, basically all the options except a LSD.
Well I didnt really think of the reluctor wheel so I changed everything in the Bin for 3.29's- 89% reduction in the transmission and tcc settings where the MPH was indicated, not engine speed.
Well my question is When addinig 3.29's with a reluctor wheel, what SHOULD have been changed in the bin VS. what I changed. It doesn't drive right currently and when the TC unlocks I see high KR. Like if i give it 30% throttle and I feel the tc unlock I get high KR even under light load so I figure my settings in the PCM are screwed up.
I searched and cant get a definitive answer....
Help.
Dave