I now have a 4l65e ,its the factory trans ,want to change my pcm to a manuel flash so I can run a 400 turbo.
I now have a 4l65e ,its the factory trans ,want to change my pcm to a manuel flash so I can run a 400 turbo.
What year GTO? 04?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
There is no manual flash for a TCM. If the vehicle had a TCM it means it had an auto transmission
04's are a different story in that the LS1 pcm also controlled the tranny. 05+ had separate modules for the pcm/tcm.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Last edited by rcsfastgto; 10-16-2008 at 07:53 AM.
Not sure, no experience personally with swapping to an M6 from a vehicle that had a TCM, might be as easy as getting rid of the tcm but honestly I'm not sure.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Ok I have another question I was thinking after I do a burn out and try to use the trans brake in the 4l65e this is where the problem starts what is the glitch in the programming that causes the trans not to shift?and the speedo not to work?I beleive this is the cause of part of my problems,since the TCM does not know the car is moving it does not tell the trans to shift thus not alowing the car to shift after I released the brake, car seems to be just in second gear,although its manually in third on the selector.
my car has a built 4l65e with a brake,after a burn out the transmission does not want to shift nor does the speedo work can someone tell me why?
Probably a wiring issue of some sort, pinched wire or the like.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"