i copied the tq management tables and shift tables to my stock tune.when i start the truck up i can rev it up fine then after maybe 20-30 seconds it'll only go to like 2500rpm with the pedal mashed to the floor,does the same thing in gear as well.sooooo what changes did i make that would cause this?if somone could take a gander at my tune files id appreciate it
1st is from the Tune Repository
2nd is my tune with copied tables
3rd is my stock tune
thanks andrew
07 tbss awd-pcmforless tune-ieatsrt8-corsa-billet catch can-PB udp-efan-3in y pipe-dashawk
07 ccsb z71-my tune-airaid-gibson-servos-asp-s2 tb-billet catch can-aeroforce's
nothin guys???
07 tbss awd-pcmforless tune-ieatsrt8-corsa-billet catch can-PB udp-efan-3in y pipe-dashawk
07 ccsb z71-my tune-airaid-gibson-servos-asp-s2 tb-billet catch can-aeroforce's
Did you install different size rear tires? Return all the torque management tables back to stock. Then halve the trans torque reduction tables (normal & performance).
Zeroing and or maxing out torque management tables will cause issues like your having.
Russ Kemp
Reply With Quote