-
Advanced Tuner
LC-1 Ground issues
I see a lot of posts that point to grouding issues being cause of most of the LC-1 problems.
What exactly is a good ground and where are the best grounding points.
What grounding points don't work?
Is it just a bad connection? Insufficient contact resulting in a bad ground?
I have a C5 and I plan on running my along the tunnel and through the pass. footwell near the PCM.
Thanks,
Steve
-
Tuner in Training
Bring ALL of the grounds for the LC-1 to one terminal lug. I attached it to the ground lug on the frame just inboard of the battery on my 2000 Corvette. I also wired up Analog 1 to simulate my narrow band and put it in the factory bung. No problems with it set up this way.
Reb