Results 1 to 12 of 12

Thread: Random P.E. not working

  1. #1

    Random P.E. not working

    At random the P.E. won't work in my truck. This is the only vehicle I recall having this problem with. It seems that if the run time is less than a minute or two it will not go into power enrichment. I've also had this happen when logging long drives with short wide open hits. The truck is an 06' 1500 with L59. Any idea's?

  2. #2
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    No ideas without a tune and log besides a guess list of what could cause it. Please provide the necessary information when posting so we can help.
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Without a tune & log its impossible to say so I'll just take a guess and point you to this thread

    http://www.hptuners.com/forum/showth...682#post109682
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  4. #4
    I'm trying to get the upload to work, it isn't right now. I have many logs and my latest file on hand.

  5. #5
    Here is a couple of logs. Trying to get the HPT file to load.

  6. #6
    Another attempt with the file.

    BTW, I'm going to try the suggested from your post. This is the first time I've really ran into this as being such a big problem child.
    Last edited by zippy performance; 08-26-2008 at 10:55 AM.

  7. #7
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    Read what Bill posted and also make sure your TPS voltage is in range for WOT.
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB

  8. #8
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Your tq enable is probably the delay you'll need to adjust to 0
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  9. #9
    Thanks guys. I'm going to take it to lunch and give that a try. I was anxious to finally drive it with the new cam in better weather. The DA this morning was -90 in the way in to work.

  10. #10
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    Must be nice to get a negative DA lol
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB

  11. #11
    It's rare, but we get it once in a while. Normal altitude is around 600 in my area.

  12. #12
    Problem fixed, thanx. I've been chasing that problem since I bought the truck new.