Results 1 to 9 of 9

Thread: How much WOT timing in your Hemi?

  1. #1
    Tuner
    Join Date
    Sep 2010
    Location
    Alpena, MI
    Posts
    186

    How much WOT timing in your Hemi?

    I noticed I have 26* with the current tune across the board at WOT. 0 knock, so I'm kicking around the idea of having the tuner add more timing. How much timing are you guys running at WOT?

  2. #2
    Tuner
    Join Date
    Sep 2010
    Location
    Alpena, MI
    Posts
    186
    Here are my two scans





    hemiwot1.hplhemiwot2.hpl

  3. #3
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    personally I think thats a lot of timing for Pump on a Hemi
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  4. #4
    I'm not sure I would add more. I do know that it will hold alot on the part throttle timing table

  5. #5
    annastefy
    Guest
    I think that's a considerable measure of timing for Pump on a Hemi.

  6. #6
    too much already.

  7. #7
    Tuner
    Join Date
    Sep 2010
    Location
    Alpena, MI
    Posts
    186
    Just an update, I'm at 29* now, dropped a little over a tenth in the 1/8th mile with just that change.

  8. #8
    Advanced Tuner
    Join Date
    Apr 2014
    Posts
    704
    Quote Originally Posted by Dusty05 View Post
    Just an update, I'm at 29* now, dropped a little over a tenth in the 1/8th mile with just that change.
    Sweet! What might be even more representative is, how did the trap speed react?

  9. #9
    Tuner
    Join Date
    Sep 2010
    Location
    Alpena, MI
    Posts
    186
    I want to say less than a half mph. My ETs are very consistent launching in 4wd. Trying to keep my 60' in the 1.7x range on street tires. Usually it's 1.80. I put air shocks on the rear a couple weeks back, we'll see if that keeps the front from spinning as much lol