Results 1 to 8 of 8

Thread: LS2 randomly commanding 15.5 AFR at idle

  1. #1

    LS2 randomly commanding 15.5 AFR at idle

    I found that my car is randomly commanding 15.5 AFR. I've downloaded and installed version 2.22.3128.16242 and have the post O2 test disabled.

    In the log, the anomalies start at frames 5062, 18812, and 24373.

    Any idea why? Disable the cat test too? I have Kook's high flow cats installed.

    Gerry
    Last edited by ShoddyHog; 08-02-2008 at 07:45 AM.
    06 M6 GTO - L92 Heads - Flowtech AK-47 cam - ported LS3 intake - ported TB - Kooks 1 7/8 - Cats - SVEDE OTR CAI - H-Pipe - Flowmaster Super 40s

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,266
    Have you tried disabling the cat test to see if that does the trick?
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Quote Originally Posted by Bill@HPTuners
    Have you tried disabling the cat test to see if that does the trick?
    No, because I have cats installed and didn't know if that'd be a good thing to do or not.

    I'll disable it and give it a shot.

    Gerry
    06 M6 GTO - L92 Heads - Flowtech AK-47 cam - ported LS3 intake - ported TB - Kooks 1 7/8 - Cats - SVEDE OTR CAI - H-Pipe - Flowmaster Super 40s

  4. #4
    Advanced Tuner flea's Avatar
    Join Date
    Aug 2006
    Location
    Illinois
    Posts
    242
    Bill is correct, disabling the master catalyst test should do the trick. I had the same problem after installing Kooks LTs.
    Flea
    --------------
    2006 GTO
    Kooks LTs, NGK WB
    12.96 @109.12

  5. #5
    Thanks guys. I ran one log yesterday, and it did not do it again. I'll know for sure tomorrow when I drive home from work.

    Gerry
    06 M6 GTO - L92 Heads - Flowtech AK-47 cam - ported LS3 intake - ported TB - Kooks 1 7/8 - Cats - SVEDE OTR CAI - H-Pipe - Flowmaster Super 40s

  6. #6
    That did do the trick.

    Now, the question is are there any drawbacks to not having that test enabled?

    Gerry
    06 M6 GTO - L92 Heads - Flowtech AK-47 cam - ported LS3 intake - ported TB - Kooks 1 7/8 - Cats - SVEDE OTR CAI - H-Pipe - Flowmaster Super 40s

  7. #7
    Advanced Tuner
    Join Date
    Jul 2006
    Posts
    218
    Quote Originally Posted by ShoddyHog View Post
    That did do the trick.

    Now, the question is are there any drawbacks to not having that test enabled?

    Gerry
    Bringing back from the dead.

    What affect does having the general catalyst test disabled on a obd2 emmisions test?

  8. #8
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,266
    Quote Originally Posted by ct06gto View Post
    Bringing back from the dead.

    What affect does having the general catalyst test disabled on a obd2 emmisions test?
    No idea
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"