Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 57

Thread: VCM Suite 2.22 available now!

  1. #21
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Quote Originally Posted by JasonB
    I'm confused.
    I got the email about the new release. I go to the customer service center, it says download current build Created on April 30, 2008.
    What I've been using is 2.22.3042.37744
    I tried downloading the latest as said above, I tried uninstalled it and installed the new release and it still has the same number: 2.22.3042.37744

    What am I doing wrong?
    Are you a serial interface user or usb?
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  2. #22
    If you have a serial interface (not MPVI USB) then the download will be quite old. We had to wait a very long time for hotmail and other similar mail services to allow email to them after we relocated our servers to our new office (our new IP's were being blocked and we didn't account for this possibility). This is the main reason some people may have noticed the 2.22 download a couple of months ago but strangely saw no announcement from us. Rather than say something and then be asked everyday if things had been fixed we decided to just wait.

    Since we had added some new parameters for newer vehicles in between times we recompiled 2.22 for MPVI (USB) users only just recently and once we got the all clear made the final 2.22 announcement. Unless we move office in the near future, we shouldn't see this situation again

    Hope this clears it up.

    Chris...
    I count sheep in hex...

  3. #23
    Tuner
    Join Date
    Dec 2004
    Location
    Port St Lucie, FL
    Posts
    115
    Quote Originally Posted by Bill@HPTuners
    Are you a serial interface user or usb?
    I have the serial interface.

  4. #24
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Serial interface users have a completely different version number than USB users. Chris explained it best in his above post.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #25
    Advanced Tuner Bluecat's Avatar
    Join Date
    May 2006
    Location
    Catlettsburg, Ky
    Posts
    407
    Mine also says April 30, but when I downloaded the file again it did change my version to 2.22.3110.28034.

    *nevermind I didn't see page 2*

  6. #26

    mscrowks.dll loading problem

    Hi,

    We downloaded the V2.22 software and we run VCM editor we get a message box that pops up that says:

    VCM Editor.exe -.NET Framwork Initialization Error

    C:\windows\microsoft.NET\framework\v2.0.50727\mscr owks.dll could not be loaded.

    We also downloaded and installed .net framework 2.0. We checked the folder and that particular file is in the correct location.

    What do we need to do get this working?

    Thanks

  7. #27
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Windows SP2
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  8. #28
    We downloaded and installed NetFx20SP1_x86. Is this correct? Anyway, it didn't work. Any other ideas?

  9. #29
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    No, windows XP SP2
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  10. #30
    Tuner
    Join Date
    Apr 2007
    Location
    Terre Haute, IN
    Posts
    133
    sorry for the dumb question but even though the build date says april 30th, i should still download it again for the newest revision?
    2006 Ford F250 CCSB 6.0 Powerstroke
    SCT Tuned by Vivian @ QuickTricksAutomotive

  11. #31
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Yes, we've added new support & features as recently as last week.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  12. #32
    Tuner C5pilot's Avatar
    Join Date
    Dec 2007
    Location
    Philly Suburbs
    Posts
    53
    Um, then you REALLY need to include the ENTIRE version number on the home page so people know at a GLANCE whether they have the latest version. Just a thought. The next obvious thing to do is include a list of changes so we can decide whether we need to risk updating our working versions for junk we may not need. JMHO, thanks for all your efforts.

  13. #33
    Advanced Tuner
    Join Date
    Jun 2006
    Posts
    384
    I re-download and re-install every week or so. I want all the available "junk" asap

  14. #34
    Tuner in Training PapitoGTO's Avatar
    Join Date
    Mar 2008
    Location
    Marietta, GA
    Posts
    21
    When was the last update?
    2006 Pontiac GTO
    2003 Infiniti M45--- Payed off
    2009 BMW 135i- Awaiting Transport

    Mods: TigerShark Cam Package, Volant intake, GFI Ported TB, GMM Race, MSD Plug Wires, Stainless Work headers w/cats, Magnaflow X-pipe, Kooks "Afterburner" Axlebacks, Pedders Strut Bar, Pedders Street I, Drift R 19", HpTuners
    RWHP: 419.72 RWTQ: 402.51

  15. #35
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    ~1 month ago, next public update will be 2.24
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  16. #36
    Advanced Tuner
    Join Date
    Jul 2007
    Posts
    320
    Last download I had of 2.22 has a file date of Aug 18th (downloaded within the last few days).
    97 Grand Prix GTP (not going to bother listing mods in detail) 1 messed up 97 PCM with about 30-50% of a 2003 calibration and parts of a few others.

  17. #37
    Tuner in Training PapitoGTO's Avatar
    Join Date
    Mar 2008
    Location
    Marietta, GA
    Posts
    21
    Any hints on what 2.24 will have?
    2006 Pontiac GTO
    2003 Infiniti M45--- Payed off
    2009 BMW 135i- Awaiting Transport

    Mods: TigerShark Cam Package, Volant intake, GFI Ported TB, GMM Race, MSD Plug Wires, Stainless Work headers w/cats, Magnaflow X-pipe, Kooks "Afterburner" Axlebacks, Pedders Strut Bar, Pedders Street I, Drift R 19", HpTuners
    RWHP: 419.72 RWTQ: 402.51

  18. #38
    Tuner in Training
    Join Date
    Dec 2007
    Location
    The Mitten
    Posts
    38
    Any word on Enclave support in 2.24?
    2006 Pontiac GTO, Torrid Red, M6, "LS2.5"
    - LS3 Heads; 11.5:1
    - ARH Headers
    - Magnaflow
    - Svede
    - RipShift race

    - No Lift Shift


    2012 Chevrolet Cruze, Blue Topaz Metallic, M6, 1.8
    - Stock
    - 42 MPG

  19. #39
    Tuner in Training
    Join Date
    Dec 2006
    Posts
    10
    OK its been a long while since I worked with HP tuners. I bought it a while back. My CD displays ver: 2.0.16 Is my serial number the ID#??? Also I have moved twice. I dontknow which email was attached to this serial number. Any help to obtain the 2.22 update.

    Edit...Reread FAQ..I had to add the zero's in front of my ID/Serial # ---------All good now.

    Thanks
    Last edited by bowtye; 10-25-2008 at 07:52 PM.

  20. #40
    Tuner in Training Kris_LS1's Avatar
    Join Date
    Jun 2006
    Location
    Sydney Australia
    Posts
    23
    Quote Originally Posted by PapitoGTO View Post
    Any hints on what 2.24 will have?
    I dare say that it will have support for Australian fords at long last.

    (now in Beta test stage)