The first VCM read is from a 1997 S10 2.2L. After reading I was unable to open it and was instructed to send an email to support (which I did).
What I am trying to accomplish,
My customer has a 1997 S10 2.2L, something shorted out on the fuel system so he replaced the fuel tank sending unit and dash gauges. The engine will run, however the fuel gauge does not respond. Part of the VCM was also shorted so he purchased a new VCM from a 1998 Cavalier 2.2L to replace.
I attached the file for the Cavalier. It read no problem and I can edit.
We tried using the Cavalier VCM in the truck, and after start up, the engine dies immediately. (any Ideas)
I found a tune in the repository for a 1999 S10 2.2L and was wondering if I can reflash the Cavalier VCM with this tune?
Your help is greatly appreciated