Page 4 of 7 FirstFirst 1234567 LastLast
Results 61 to 80 of 135

Thread: 6.0, 6.4 and 7.3L VCM suite coming

  1. #61
    Tuner in Training
    Join Date
    Dec 2011
    Posts
    22
    any idea how long it will take for 6.4 support? I was considering SCT but id rather spend $3000 on credits then new software to learn. I have access to a few 6.4s could send in reads if it will speed things up.

    looking forreward to all the new ford support.

  2. #62
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    I have no ETA. I have 6.0L underway and probably not too far out, along with the newer Ford gas stuff (not far out either). It will be after those two are done. I am making good progress though.

  3. #63
    Tuner in Training yukon197gt's Avatar
    Join Date
    Jan 2011
    Location
    Dayton, OH
    Posts
    12
    I have no ETA. I have 6.0L underway and probably not too far out, along with the newer Ford gas stuff (not far out either). It will be after those two are done. I am making good progress though.
    Fantastic, been following these posts all the way back to 2011..... Y'all have been hard at it. Thanks!!

  4. #64
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by yukon197gt View Post
    Fantastic, been following these posts all the way iback to 2011..... Y'all have been hard at it. Thanks!!
    Ford development has been slow since there was no one dedicated to doing just Ford until I started.

  5. #65
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Quote Originally Posted by FJR View Post
    I just ordered my tuner today for a GEN III I have in my jeep. But also have a 05 Ford f250 6.0L and would be great to be able to use it on that also.
    If you have not already done so please make sure to read your vehicles pcm and send in the file to support at hptuners.com so I can add it to Eric's work in queue
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  6. #66
    Tuner in Training yukon197gt's Avatar
    Join Date
    Jan 2011
    Location
    Dayton, OH
    Posts
    12
    I bought the VCM Suite for GM vehicles, I now have a powerstroke, will I be able to use the same hardware with ford credits? Once the software is ready obviously.

  7. #67
    Senior Tuner
    Join Date
    Dec 2009
    Posts
    1,084
    Yes the hardware and software will be the same.
    Just need to purchase Ford Credits.

  8. #68
    Tuner in Training
    Join Date
    Dec 2013
    Posts
    11
    Sent it today hope it works.

  9. #69
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Thanks, we need all the reads we can get.

  10. #70
    Advanced Tuner midevil1's Avatar
    Join Date
    Feb 2009
    Location
    TX
    Posts
    364
    I can send you a factory read and a SCT tuned read.????
    2023 Ford Edge ST

    2020 Ford F150 King Ranch 5.0

  11. #71
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by midevil1 View Post
    I can send you a factory read and a SCT tuned read.????
    We only need stock reads.

  12. #72
    Tuner in Training
    Join Date
    Dec 2012
    Posts
    23

    file

    FORD 2005 6.0L STOCK TM.hptHello, here I upload a file of a ford 6.0 l diesel, but reading it get me checksum error

  13. #73
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Thanks, it is unsupported at the moment, but I do appreciate the read.

  14. #74
    Advanced Tuner
    Join Date
    Mar 2008
    Posts
    211
    Glad you on board with hptuners to get the ford guys happy. I just picked an 08 F250 super duty 6.4 diesel. Was about to get another system and saw this. Waiting on you
    Will my current hp software read my stock tune, if so I'll read and send to you.
    2002 6.6 TR6060 ZO6 (520Whp)
    2014 Audi S7 (730whp)

  15. #75
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Not at the moment

  16. #76
    Potential Tuner gingram2000's Avatar
    Join Date
    Jan 2014
    Posts
    2
    Do you have a tentative release date for the 7.3l??

  17. #77
    Advanced Tuner
    Join Date
    Feb 2009
    Posts
    277
    I don't think they have even started taking reads for the 7.3?

  18. #78
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    No ETA for 7.3L

  19. #79
    Advanced Tuner midevil1's Avatar
    Join Date
    Feb 2009
    Location
    TX
    Posts
    364
    how does I go on the 6 oh no's?
    2023 Ford Edge ST

    2020 Ford F150 King Ranch 5.0

  20. #80
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by midevil1 View Post
    how does I go on the 6 oh no's?
    Not sure what you are asking... ?